• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc No brake light but rear light.

Johnnymannen

Husqvarna
AA Class
Hey guys. My son is taking his license on Thursday so we are preparing his WR300 2011 for that with indicators and stuff. we have no brake light at either front or rear levers, and no blinkers. What is the common sources for these problems?Front and rear light are working. Thanks in advance!The rear lamp is new.

Johnny
 
For the brake lights, assuming your electric installation is complete and in good condition, check the brake switches, the rear is a hydraulic one similar to this:
Tusk-Hydraulic-font-b-Brake-b-font-font-b-Switch-b-font-For-Single-tube-1.jpg


The front is a little switch:
br_110_4671_95.jpg


Check if they work by probing continuity while pressed, or shorting the cables and see if the brake light works...

For the turn signals check if your relay is there and working...

Good luck
 
Back
Top