• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc New piston set choose help please .)

EURO1215

EURO1215

Husqvarna
A Class
Hello everyone ! after succesful changing of new con rod. Iam about to buy a new piston set , since iam new to this stuff, could anyone help me ? The only piston set that is available in my country is Athena , is this brand good ? will it last ? and also there are 3 sizes , 77,94 ; 77,95 ; 77,96 which one should i get how to know which one i need ? sorry for being total amateur .D and thanks for every response ! .)

Site with piston (CZE) : http://www.2hmoto.cz/cz/husqvarna-p...60-rok-90-03-athena-kovany.html?group_23=3347
 
Athena will be good. Look on the bottom of your cylinder for a letter from A-F, that will tell you what size you will need. In reality any size will work though.
 
Your best bet is to measure the clyinder to get the right size, athena are good.
The top of your old piston somewhere under the carbon should be stamped ABC or D now i doubt your pistons a D especially if your still on the original lining.
 
You must log in or register to reply here.
Back
Top