• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Looking for torque clarification

twolane

Husqvarna
A Class
I need some help trying to figure out how far to torque down the bolts on the oil/ clutch cover. I believe the part number is ZB00 67545 for the bolts. Do they just get torqued to about 4.8 ft/lbs?
Is it 4.4 ft/lbs or something totally different?
Thanks!
 
The manual I have for the 2008 610 says 6.5ft/lb for the 13 screws on the oil pump side and 5.8ft/lb for the alternator cover side.
image.jpg
image.jpg
 
Back
Top