• 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

FE/FC license plate bracket

nep2012

nep2012

Husqvarna
A Class
Just bought a 2015 FE 350 want to put my plate on it. Anybody know where you can get a good sturdy license plate bracket.
 
I do not like license plate brackets as I don't need to promote any company with it and they are usually made as a way for a dealer to advertise, not as a better way to hold the plate. Find a good backer for it and trim to match the plate and call it good. I used an old number plate. Similar plastic to the bodywork/fender but thicker. Enduro Engineering I think, makes a generic black backer plate.

22-700.jpg


_GGP1156.jpg
 
Hello all,
Sorry for the newb question... not sure if I'm going with 350 "S" or non-S.

If I end up with the 'non-S', will its tail light function as a tail & brake light if I simply add a pressure switch?
Or must I get an aftermarket tail lamp assembly that will?

Thanks for any wisdom!
 
cahuco said:
Hello all,
Sorry for the newb question... not sure if I'm going with 350 "S" or non-S.

If I end up with the 'non-S', will its tail light function as a tail & brake light if I simply add a pressure switch?
Or must I get an aftermarket tail lamp assembly that will?

Thanks for any wisdom!
Click to expand...
Just got a 2015 FE 350 and no there is no brake light the dealer hooked it up so it worked with some wiring. No aftermarket tail lamp assembly, Took him like 10 minutes.
 
octagon pilot said:
https://www.rockymountainatvmc.com/p/1156/52024/Husqvarna-License-Plate-Holder-?term=husqvarna license

or probably even better

http://www.ziptyracing.com/zipty-license-plate-holder/


I haven't seen either in person though
Click to expand...
octagon pilot said:
https://www.rockymountainatvmc.com/p/1156/52024/Husqvarna-License-Plate-Holder-?term=husqvarna license

or probably even better

http://www.ziptyracing.com/zipty-license-plate-holder/


I haven't seen either in person though
Click to expand...
Thanks. I ordered the one from Rocky Mountain a buddy has a KTM 350 and says his worked fine its basically the same thing.
 
You must log in or register to reply here.
Back
Top