• 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

FE/FC Husqvarna TE350 SEM Stator - Single Phase or 3 Phase?

T

Thehappyclapper

Husqvarna
Hi

New to the world of Husky and forums to be honest and could use a little help please...

I have a Husky TE350 (1992) that has been fitted with a TE610 (1998) engine with the exception of the stator which is the SEM version not the Ducati version, my question: Is the SEM stator a Single Phase or Three Phase output?

Thanks
 
You should be able to just count the wires out if the stator, or going into the regulator. 3 charge wires = 3 phase 1 charge wire = single phass. Don't count the ground and power wires though
 
You must log in or register to reply here.
Back
Top