• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Help! TE 250 No Spark

E

eagleslight

Husqvarna
I have a TE 250 2010 with about 300 km on it.
Racing CDI an Injector.

Bike started an ran fine for maybe 10 minutes. Then the odo was gone and the bike won´t start.
Checked the fuses on the right side an replaced one.
Odo is fine, but no spark.
Replaced the sparkplug no spark.
I can´t remeber but I think I should hear the fuelpump, no sound...
All the fuses also on the left side look good.

Today I cleaned the bike (pressurewasher) and dright it with airpreshure.
Started cleaning the electric contacts with WD40.
Tryed again no Spark. Battery gone..
Recharched the battery..(15 min ????) no spark.
No fan running.
Electrik starter turns.

Excuse may bad english I´m German...

Any ideas what could be the problem on my little italian diva???
Thanks in advance.

Bernd
 
eagleslight said:
I have a TE 250 2010 with about 300 km on it.
Racing CDI an Injector.

Bike started an ran fine for maybe 10 minutes. Then the odo was gone and the bike won´t start.
Checked the fuses on the right side an replaced one.
Odo is fine, but no spark.
Replaced the sparkplug no spark.
I can´t remeber but I think I should hear the fuelpump, no sound...
All the fuses also on the left side look good.

Today I cleaned the bike (pressurewasher) and dright it with airpreshure.
Started cleaning the electric contacts with WD40.
Tryed again no Spark. Battery gone..
Recharched the battery..(15 min ????) no spark.
No fan running.
Electrik starter turns.

Excuse may bad english I´m German...

Any ideas what could be the problem on my little italian diva???
Thanks in advance.

Bernd
Click to expand...
I had the identical problem. It was a rubbed through wire, at a part of the loom between the fuel tank and the frame. It was a wire that went into the ECU, that might explain why I had power to the starter motor but no spark, dash etc. Your English is better than some I know whose primary language is English.
 
I, think it was this connection.

Thanks Livio...a real world Buddy...

the diva is mouning again



0
 
You must log in or register to reply here.
Back
Top