• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc HELP! 99 360 Mikuni jetting

2premo

2premo

Husqvarna
Pro Class
I am away from home and made a boo-boo, I bought a couple of bikes one is a 99 360 and it is jetted for 3500' I know this because he gave me a sheet of the work done including jetting,
the other one I bought was a 98 360 and I have no idea what was done, anyway they are a pain to start at 1500', I need a baseline for the jetting at 1500' and forgot the jetting specs and the owners manual that at least had the stock jetting
hoping to ride today but not interested in wearing myself out starting it
 
02 WR 360, gnarly pipe/turbine core II. This jetting is from Jay Hall at Halls Husky. Never fouls plugs and runs clean throughout all ranges.

My altitude (St. Louis, MO) 500-1000 ft.
420 main, 30 pilot, 4.0 slide, 64 needle in center position, air screw out 1 turn.

Moab Utah 4000-7500 ft.
380 main, 25 pilot, with needle in 2nd groove from top
 
You must log in or register to reply here.
Back
Top