• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc FMF vs Pro Circuit?

giantjoe

giantjoe

Husqvarna
AA Class
I'm looking to upgrade from my kinked stock pipe. I don't want to buy a new silencer and I can't remember if either of them need a different one.
 
pretty sure all FMF use stock silencers
what Pro Circuit I've seen for Italian Husky's they use a different silencer
 
Fmf is ok with stock, PC only works with PC
I think you're limited to:
-Fmf gnarly
-PC works(bare finish) or plat 2(with silencer). Fitment I found was poor on the pipe mounts & too close to rear brake line(melted 2!)
-Dep(bare or nickel)
-scalvini & 2C possibly
 
You must log in or register to reply here.
Back
Top