• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc Fast By Ferracci Triple clamps for a 360

timpjr

timpjr

Husqvarna
A Class
My top triple clamp on my 93 360 tore on the side and I found a set on E-Bay here's what the add says:
Fast By Ferracci​
7075 Billet Aluminum​
Husqvarna CR125 & CR250​
45 mm 185 mm wide 23 mm Offset​
Fits Stock 45mm Forks.​
​
The width and offset are the same but I believe they are for 45mm Marzocchis, anybody​
know if the O.D. of the 45mm Marzocchis are the same as 45mm Showas ? Maybe someone​
has them and could get me a measurment.​
​
Thanks,​
Tim​
​
​
 
You should also check the steering stem size, your bike has a 25mm stem and those may be the 29mm stem which could be a bearing issue as well.
 
Thanks for the heads up rancher1 do you think the frame head tube would have a larger diameter or I could just swap bearings and stem as well
 
So the seller responded, didn't expect him to. Think I've run across another nice guy... so few these days.
"Top clamp stem 26mm fork tube 54mm
Bottom clamp stem 30mm fork tube 58mm"
so now I guess I should do some measurements
 
You must log in or register to reply here.
Back
Top