• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc cr 125 throttle cable ?

S

skid

Husqvarna
A Class
08 cr 125

Mine is routed between the bottom motor mounts just before the cable goes into the carb. this keeps it nice and tucked in and out of the way .... but makes it impossible to just remove the slid and needle as there isn't enough room. I was planning to move the cable to outside the motor mounts and use a zip tie to keep it close to the motor mount. I haven't given it a good look over yet, but wonder about brush snagging the cable or maybe coming in beside the motor mount may cause cable alignment issues going into the carb. What do you think??

Yes I know ... the carb comes right out .... when your in the woods or track side and its muddy and you don't have a nice clean enviroment keeping the carb in the boots just seems like a better approach to me.
 
My throttle cable is routed on the left side of the motor mount. Then, you can route the carb easily to remove the slide. Rotate it the other way to remove the main jet or float bowl.
 
You must log in or register to reply here.
Back
Top