• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc Converting 09+ seat to fit 06 WR125

thebleakness

thebleakness

Husqvarna
C Class
This WR that I have looks to have been sitting in the Phoenix sun for the past few years and the plastic / seat is really dried out. After last weekends race, the stock seat cover and foam is coming apart really bad.

I can get an Acerbis Xseat for a good price but I'm not sure what sort of modification I would have to do to get it fitted right. Has anyone else done this sort of conversion? Or if anyone has both of the years in question, would you mind looking at the differences between the two? Maybe take some pictures?

Thanks!
 
Different frame in 09 I don't think the seat will fit you need 2008 and down. Try a guts racing cover and foam.
Bill
 
i converted a 2010 tc250 to suit my wr125, you will need to cut part of the plastic from the seat pan at the locking point to the tank.
The aluminum prongs will need to be relocated but i found the seat held its position without them,but if you have the pan just get re-foam and cover.
 
You must log in or register to reply here.
Back
Top