• 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Clutch Sticking After Reassembly

J

Jbenw

Husqvarna
I have recently had to strip the case down on my '15 FE501 to replace a failed torque limiter. Do to so I had to strip the clutch and basket out. The plates are all in spec so I did not replace them when reassembling and kept them all on the same order. Everything spins freely until I reinstall the spring and push plate (using factory setting II). With the clutch completely assembled and the clutch lever pulled in I can barely spin the back wheel with all my strength. The plate is moving about an 1/8 inch when pulling the lever and I can move the plates in and out of the basket when the lever is pulled. There were no issues with the clutch on this bike prior to the disassembly, so I'm guessing I screwed something up. Are there any common mistakes which can lead to this or has anyone ever experienced this?

Thanks
 
You must log in or register to reply here.
Back
Top