• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc clutch chatter

G

gordon lindsay

Husqvarna
B Class
As title says my clutch on my wre 125 is quite noisy until the clutch lever is pulled in then it goes away is this normal or will i need a new clutch thanks
 
If its when its in neutral it does it, its likely its the clutch push rod rattling inside the shaft. We've had an 04 thats done it since new
and still working fine.
 
hi thanks for the reply yes that what mine is doing i,ve put wr friction plates now and ebc hd springs its helped alot but still doing it a little bit
i think the fact the plates and springs were in need of replacing was causing alot of the noise
 
You must log in or register to reply here.
Back
Top