• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Carb float ?

9

91husky

Husqvarna
Ok , so I got a new needle clip cuz the last once was missing , and float valve cuz the last one was like 9 years old . adjusted the float level to the carb spec , I have a delorto vhsb and it said to adjust float tang parallel to carb base . Does anybody have experience with the tang needing to be adjusted differently than specs , running it the way it currently is makes the bike flood out in a few seconds , setting the tangs high ( with carb upside down ) makes it run . ? Any related problems or recommendations ?
Also if it makes a difference , because the way it comes out of intake boot and onto filter housing, tha carbs sits at a slight angle
 
You must log in or register to reply here.
Back
Top