• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc Backwards updated plastics/tank

O

old3

Husqvarna
AA Class
I'm looking at my options with my 99 WR125 and I've seen the mods needed to go to newer, readily available body parts. I like the generation I have, but there is nothing available at all. Even used shrouds are super rare. I see the previous gen, up to 94 has brand new shrouds available aftermarket. I found a 94 WXC125 tank and can get the shrouds so, how bad is it to get it on a 95-99 frame? I'm guessing the seat is different too as the 94 seems to have a raised rear tank surface. Dang it, I just put a new foam & cover on the 99 seat, maybe it'll fit the older pan?

Uncharted waters here or has it been done?

Thanks.
 
You must log in or register to reply here.
Back
Top