All 2st Anyone in Iowa area with a 165 wanna swap bikes for 30min?

[Chums]

Like title says I'm in the Iowa City Area and can't decide if I want a txc310r or a wb165!! I rode the 310 but not the 165. I race a 14'wr300 and could make a short weekend trip to ride sometime if anyone would be willing to swap bikes back and forth while we ride???

I like the torque and traction of the 4s and thought having one would be a good addition to the 300. The 310 seems to snake through the very very tight stuff a little better than the 300 as well.

I THINK I will like the super lightness of the 165 and think a high comp head will help me with my need for speed but don't know if that package will benefit me in a 2hr hare scramble or not?

 

[Chums]

This is my bike you'd be riding

 

[john01]

I'd like to read your thought on the two after your test ride.

 

[Chums]

I will definitely give feed back! I just need a willing victim... I mean volunteer! Haha

 

[Hoov165x]

Like title says I'm in the Iowa City Area and can't decide if I want a txc310r or a wb165!! I rode the 310 but not the 165. I race a 14'wr300 and could make a short weekend trip to ride sometime if anyone would be willing to swap bikes back and forth while we ride???

I like the torque and traction of the 4s and thought having one would be a good addition to the 300. The 310 seems to snake through the very very tight stuff a little better than the 300 as well.

I THINK I will like the super lightness of the 165 and think a high comp head will help me with my need for speed but don't know if that package will benefit me in a 2hr hare scramble or not?

You need two new bikes- the 310 and the 165****************************************!

 

[Chums]

You need two new bikes- the 310 and the 165 !

Your my new best friend and my wife's worst enemy haha!

 

[husky3002t]

This is my bike you'd be riding

where did you get the sticker kit for your 300 bud?

 

[Chums]

where did you get the sticker kit for your 300 bud?

Its a custom kit from decal works, I had them do some custom art work and i picked ,placed , and chose all the colors. They are top notch this was the first time I've used them and would buy from them again!

 

[Xcuvator]

Its a custom kit from decal works, I had them do some custom art work and i picked ,placed , and chose all the colors. They are top notch this was the first time I've used them and would buy from them again!

It does look nice. I have used them too and agree that they are top notch

 

[rockdancer]

Iowa - how's mike and frank?
And Danielle of course

 

[Chums]

Iowa - how's mike and frank?
And Danielle of course

All us corn cobs from iowa are doing great! Lol. I actually saw their van driving down the interstate once. Never been there but that store is only an hour away from me.

 

[rockdancer]

That show is one my favourites ... Danielle is a bit hot

 

[razornpc]

race that 165 for a year then hop over to the 300. youll be amazed at what youll learn in the process.

 

[razornpc]

or settle for the 144. I raced mine for a year and a half when I started racing and it helped me a in a lot of ways.

 

[Chums]

or settle for the 144. I raced mine for a year and a half when I started racing and it helped me a in a lot of ways.

Yeah been doing my research and 165 it is, just got a purchase agreement to look over!!! All they have for 14's is the CR so I'd have to get a upgraded stator to run a head light in those Enduro's you like,lol. I have to go on a diet and stop preparing for hibernation it has put me at 230lbs and need to be at 200! Got a 3 gal IMS tank, Lectron, and Rekluse specked out so should be able to do 90 miles in a go if It will haul me around that long. Both the 14' 300 and 14' 165 are 2 year bikes right now until I want to update...that is if I want to let them go. Just ordered a Righteous stunt metal easy pull clutch leaver to try out on the 300 so I can actually use the clutch with the rekluse 2.0 on it.