• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Alternate aftermaket brake pedal for TE 630?

T

Tori

Husqvarna
B Class
Hey guys. I've damaged the tip on the brake pedal, and I have done a rough fix; which is OK but I'd prefer to replace the entire pedal with something aftermarket.

Unfortunately, I haven't had any luck finding an aftermarket pedal that indicates it suits the 630. I have found a bunch of pedals to suit TE 250 / TE 310 / TE 450 / 510 etc etc, and I'm wondering if there is any chance that this pedal will bolt up successfully :

https://www.ebay.com.au/p/Husqvarna...d=132281167964&_trksid=p2047675.c100005.m1851

Has anyone on this forum fitted an aftermarket pedal to their 630 (or 610 as I think they are identical)?
 
Fitted a Hammerhead tip to mine very successfully - gave it good grip and also easier to contact. Get a gear lever tip while about it. There are no plug and play replacement levers - the OEM are actually quite good as are steel and strong - alu bends and cracks.
 
You must log in or register to reply here.
Back
Top