• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Air screw and throttle stop screw?

eric125

eric125

Husqvarna
A Class
I am cleaning my bike up for spring 2002 wr 125 and i was wondering on my mikuni tmx carb what do I set the screw for for the slide. I know the air screw is like 1 1-2 after jetting/adjusting. But curious how I set the slide screw.
 
After the bike has warmed up for a few minutes, you can set the idle. I like to set mine just high enough to where the bike won't stall with the clutch pulled in, in gear. For racing bikes, I used to set the idle at a "dying idle", set so that it the engine would die after 4 seconds.
 
You must log in or register to reply here.
Back
Top