• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc 93 WXC 360 Rebuild

timpjr

Husqvarna
A Class
So, I've just about got all the parts together and have begun taking measurments. I notice on the parts diagram that there is a thrust washer on the primary side of the crank between the crank and the bearing. There are three size choices .3, .4, .5mm and mine had none. So how much free play should be left after the measurement between bearing centers is determined. I'm sure its not possible to end up with zero. There should be some thermal expansion room right. Sure wish I had a shop manual with these specs.
 

Attachments

  • top_end.JPG
    top_end.JPG
    120.6 KB · Views: 19
Back
Top