• 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    FE = 4st Enduro & FC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

701 Supermoto 2020- Speedo Fault

Petr V

Husqvarna
Hi guys,
i have a problem with speedometer on my 701 SM and i need your help.
After battery charging i put battery back. Motorcycle run normally, but only speedometer shows a speed between 3-5 km/h when the motorcycle is stationary or i shake bike very gently. Then show speed between 200-299 km/h when the motorcycle is moving. And the kilometers on ODO are adding up very quickly. I clear rear wheel sensor, front wheel sensor, i check 12V battery, i change small battery on dashboard, but everything without success.
Display unit shows any error code.
Do you have any idea, where the problem can be?
Thank you!
 
Back
Top