• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

4st questions

ah_huat

ah_huat

Husqvarna
AA Class
Qs 1 :Guys, I have a few problem, i was riding my bike yesterday and i fell. broke my clutch lever and unable to start my bike due to a clutch sensor @ the lever. i have the PU kit without the diffuser in and O2 sensor on. But when i kick start my bike i cannot idle the bike as it keep stalling and when i am able to start riding the rpm keep dropping when i maintain 1/4 throttle.

Qs 2 : i have by pass my clutch sensor take out the O2 sensor and put back my diffuser. The bike now sound normal no dropping @ 1/4 throttle but And now every time i start my bike the fan is on?? the idle lag is gone but the fan is on I need help????

Thanks Husky guys in advance
Matthew from Singapore
 
Clutch lever pivot bushing missing? I missed it once replacing a broken lever & it wouldn't start w/o it.....
 
the radiator fan is working every time i start my bike it has hard starting also when bike is cold. Once every thing is warm up the bike work best. no problem so far only for the radiator fan.

Matthew
 
ah_huat;36544 said:
the radiator fan is working every time i start my bike it has hard starting also when bike is cold. Once every thing is warm up the bike work best. no problem so far only for the radiator fan.
Matthew
Click to expand...

I had the same problem last week. I tried to tighten up the connector pins for the F/I and also the temp sensor. ( I've had two fault code 2080) which is "open circuit injector" and the bike has been missing around 6000 rpms.
Anyway I also thought it would help if I bent the pins over slightly to make them fit better.:thumbsdown: Big mistake. When reinstalling the Temp sensor connector, one of the pins did not go back into the connector. Then when I tried to start my bike the fan would run all the time. And the bike was very hard to start.

TempSensor002-2.jpg

Hooked it back up to the I-beat found a (0680 fail water temp)
Checked my connector...repaired and all was well.:thumbsup:

I hope in some way that might help you.
 
ok tested both connector. took it out and spay some contact cleaner left it to dry and plug it back.. still the same problem. may be i need to bring it to the dealer to give a check.

any one know where to get a i beat software and cable that is used or cheap sale that i can get it from? Thanks guys in advance.

Matthew
 
You must log in or register to reply here.
Back
Top