• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

390 clutch question

M

Murph

Husqvarna
AA Class
Hi Guys

Just putting the clutch back together and having a bit of trouble. The parts list shows two large flat washers and an inner sleeve that the clutch bearing runs on. They are items 24 and 26 on the parts list. It appears that there should be one washer either side of the sleeve, but the sleeve on my engine seems fixed in place. Is this correct? Should the sleeve be loose on the shaft?

I took the motor apart almost a year ago and made the silly mistake of not noting how it went back together again. :doh: The old memory obviously isn't as good as it used to be.

Thanks for any advice. :thumbsup:


No need to reply now, I have got it sorted.
 
You must log in or register to reply here.
Back
Top