250smr (TC 250)

[J.R.]

Its here! '06 TC250 setup in SM trim.
This is how It came to utah:

Some assembly required

(TC 250)

Some parts:

Some more parts, Mostly spare parts in this pic:

As things progressed, Less parts layin around:

Husqvarna Titanium racing exhaust:

Extra Catch can maybe? It has an SME catch can on the bike, so maybe this was a spare:

The bike is together now for the most part:

And I found some issues that I wasnt told about by the seller...

The left fork has something on it, I couldnt get it off with my fingernail, It may come off with some polish and soft emery cloth or something. Both fork legs also feel Rough towards the bottom. Probably because the forks hadnt used the very limits of their travel for a long time and it sort of dried out..?. Im thinking some polishing could help that though.

On the Front wheel:

Rear wheel:

 

[Binni_Morgan]

are those excell wheels, never seen an SM rim do that, and i ride allot of SM !

 

[MXRider]

nice bike! sucks about the rims tho, Behr rims?
they seem softer than Excels.

 

[J.R.]

Hey hey fellow SMJ'er!

The rims are "Sanremo" wheels from Italy. I got them welded up yesterday Though! Now im trying to figure out jetting.. My idle (pilot?) circuit seems really lean. It heats the header pipe up real hot.
I turned the fuel screw all the way in to reset it, Then I turned it out to 2.5 turns out. Think I need to turn it out a little more?

BTW Im in Utah, elevation 4500ft.

 

[Phoenix]

Wow, did you know it was going to arrive in a pile??? That's not even packed well!

 

[J.R.]

I knew it was coming in pieces, Thats how I got it shipped so cheap- Should be around $260 when I pay my buddy's company.

The guy did a shitty job of packing, and also of telling me exactly what was wrong with it. He failed to mention cracked wheels! ..bastard..

 

[MXRider]

glad your getting it sorted out man, that bike should be a terror around a kart track.

 

[J.R.]

*should* being the key word its gonna take a lot of practice on my part