• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250/310/449/450/510/511 rear caliper hanger part #

johngil

johngil

Husqvarna
A Class
I don't see it listed anywhere by itself. My 630 has #22.5696.01 and I'm trying to see if it is used on other models as well so that I can fit a Scotts shark fin.
Next time you have your wheel off...
 
The caliper on the 630/610 is larger than the other models with the smaller caliper. The large caliper holder is for 220 mm rotors and the small caliper holder is for 240 mm rotors so you would not really have very good brakes.
 
Well, that makes sense. I'd still like to know the Brembo part # if anyone remembers to look.
 
You must log in or register to reply here.
Back
Top