• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc 2013 WR 125 new clutch pack needed

george549

george549

Husqvarna
AA Class
Looking to purchase a replacement clutch pack for a 2013 WR 125 and local dealer has had on back order for a long time. Any other bike model/brand plates fit this bike?
 
Steel plates are the same as 1996-2004 honda xr400, 6 plates required
Fiber plates are the same as 2004-2013 honda crf250x, 7 plates required

Later,
 
After checking more into the ebay seller they told me the clutch kit will not work in my bike...

Thank you for the listing of Honda parts that will work!
 
The Honda CRF250X is showing 2 different friction plates in the clutch pack. Do you know which one to use?
Listed:
Part # 612403 "Disc A"
Part # 612448 "Disc B"

Thanks
 
george549 said:
The Honda CRF250X is showing 2 different friction plates in the clutch pack. Do you know which one to use?
Listed:
Part # 612403 "Disc A"
Part # 612448 "Disc B"

Thanks
Click to expand...


I bought the Disk A, I have not used them yet though. I bough them as a back up after having the OEM kit on back order for 6 months or so.

I got Barnett steels on amazon to go with the OEM honda fibers, part number 401-35-055045.

Later,
 
My clutch is very grabby,noisy and abrupt until it warms up. Anyone else experience this? Is it the oil I'm using or something wrong with the clutch?
 
tnttimber said:
My clutch is very grabby,noisy and abrupt until it warms up. Anyone else experience this? Is it the oil I'm using or something wrong with the clutch?
Click to expand...

thats exactly what mine is doing since new...
i ll try a different gearbox oil soon- will use ATF instead of this freaking expensive special super dooper oil husky recommends.
 
I went with the Honda clutch as a backup for my 125 clutch that has 320 hours on it after having the stock husky clutch on backorder for over 6 months.

I just talked to Halls and the stock husky clutch kit 800088822 just came off back order last week, they have 7 in stock...

Later,
 
I just got one from Halls....he said they just received yesterday so lucky me!

Thanks everyone for your help.
 
You can experiment a lot with discs and tophat washers with your pack. If Honda plates fit then they probably have different thicknesses which can give up to six adjustments.
I prefer a softer engagement with a high torque motor, but I'm a woos.
 
You must log in or register to reply here.
Back
Top