limamikehotel
Husqvarna
My water temp sensor disintegrated over the weekend; the bike went from oozing to weeping to hemorrhaging coolant. I spliced in a length of oral airway to limp back to camp then hose clamped a deep well socket in place to get through Sunday's enduro.
Ty Davis has suggested removing the water temp sensor (having new coolant hoses formed) then running the fan off the oil temp sensor. I've also been told to just put the fan on a switch.
Suggestions? Has anyone else had this problem? I recently purchased the bike used and figger the sensor was damaged during the bike's previous life.
Thanks in advance. Apologies also in advance if this topic has already been covered; a search only turned up oil temp sensor woes.
Ty Davis has suggested removing the water temp sensor (having new coolant hoses formed) then running the fan off the oil temp sensor. I've also been told to just put the fan on a switch.
Suggestions? Has anyone else had this problem? I recently purchased the bike used and figger the sensor was damaged during the bike's previous life.
Thanks in advance. Apologies also in advance if this topic has already been covered; a search only turned up oil temp sensor woes.