• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2010 TE250 muffler repack?

Matt Shield

Husqvarna
B Class
I decided to repack the stock muffler as it's getting loud. I drilled out the rivets and slid off the alloy case and it seems that inside is a sealed stainless system that doesn't look like comes apart. The rear end is welded to a cap but the front end doesn't appear welded but certainly feels very solidly attached. Is it a non repackable item, or should it come apart???
 
Matt I have done a ton of these you have to cut the inner can apart
remove the front and rear section's and weld in new SS core
pipe re pack then re assemble and you are good to go
 
Back
Top