• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2008 TE 610 cutting out when I close the throttle

H

His Pistolship

Husqvarna
B Class
Howdy,

I just bought a used 2008 Husky 610, 1,300 miles on it now. It's cutting out when I chop the throttle real quick. It happend on a busy 4 lane freeway yesterday, sort of made me mad. This is the 4th time it has happend since I bought it (last 200 miles).

It hasn't had the PU mod, and I'm a little leary to do that mod becuse I hear it creates other issues. Is there anything I can do to make this stop in the interim, or should I just do the PU mod? The bike idles at about 1,600 rpm normally, gets up to about 1,800 after it has been ridden for about 30 minutes. I run good premium gas in it, as the compression is pretty high.

I assume this is happening because the air/fuel mixture is too lean.

Any ideas?
 
Start with PU mod. My 09 was horrible on and off throttle until PU was done. If still cutting out after that than I got nothin, sorry.
 
Install the PU kit. Your idle might jump up after that. Turn it back down and I'll bet your stalling issue goes away.
 
You must log in or register to reply here.
Back
Top