• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc 1994' husky 125 wxe

D

diefenderfer123

Husqvarna
AA Class
ok friends,

after endless searching for a replacement CDI for my 125 wxe, with no luck I pulled the stator and found that the one coil is fried so i'm looking into a powerdynamoe system.

has anybody installed a powerdynamoe in the 94' husky 125 and if so can you please let me know what part # you purchased. I am being asked to ship my stator and flywheel to Germany for inspection so they can determine the correct system for me, even though I took all the needed measurements of the stator backing plate and crank end.

thanks
 
You must log in or register to reply here.
Back
Top