• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

13 Te449 Oil Screen Replacement

La Flama Blanca

Husqvarna
AA Class
I have changed the oil twice now on my te449. the first time I removed the oil screens to clean them I should of looked at the way I pulled them out, but I didn't. Now I'm curious if I am putting them back in the correct way. I have attached a picture of how I've put them back in, with the bottom of the picture being the plug end. Thanks in advance, Tony
 

Attachments

  • IMAG0630.jpg
    IMAG0630.jpg
    48.4 KB · Views: 38
The pre-filters go in just as you have them shown here. Make sure to inspect for any holes, tears or rips. If you purchase 7602's pre-filter plugs, they aid in the removal.

imag0630-jpg.40396

http://www.endurofactory.nl/pdfs/2012/2012_WSM_TC-TE-TXC-SMR449-511.pdf Page 129
 
Back
Top