• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

06 TE 450 Clutch Master Cylinder Replacement

Ben Verkler

Ben Verkler

Husqvarna
A Class
Took a good fall today and destroyed my clutch master cylinder. I've been searching but don't really know what to look for. Any suggestions, possible upgrades?
 
Since no one has chimed in, I'll throw in my $.02 I have the '05 flavor of TE450 and have had issues with the Magura hydraulic clutch system. Did you crack the housing on your master cylinder? Could it be repaired using JB weld etc? If not, One possible solution is to get a Rekluse clutch and eliminate the whole system. I haven't checked for 2006 but the 2005 OEM replacement for the master cylinder is about $210. My bike came with an uninstalled rekluse which I am seriously considering installing as I am still having issues with my clutch system. I also have the rear brake lever to eliminate the brake pedal.

Here is a link to the OEM replacement part. Oddly enough, it is listed for '05 and '08 but there is not a listing for '06 and '07. I suspect they are identical since they are all made by Magura but maybe someone can confirm this.
http://www.motosport.com/oem-parts/...;te-450;2005&partgroup=handlebar-and-controls
 
Hi
any suggestions where to buy clutch master cylinder repair kit and brake cylinder repair kit for husqvarna te510 2006? Maybe some other bike brand repair kit fits? OEM replacement is not needed.
 
You must log in or register to reply here.
Back
Top