1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st ZipTy Shark Fin for Red Huskys R side drive, L Side Disc.

Discussion in '2 Stroke' started by robertaccio, Aug 3, 2017.

  1. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    robertaccio, Aug 3, 2017
    #1
    Huskynoobee likes this.

  2. SmokeyExpress Husqvarna
    AA Class

    Location:
    Canberra Australia
    Husqvarna Motorcycle:
    2014 WR300, 1996 WR360,2013 WR125
    I got one through Halls'. I was just as surprised as you!
    Apparently there was enough demand for them. I think I had better get another while I still can!
    SmokeyExpress, Aug 3, 2017
    #2
    Huskynoobee likes this.

  3. Rickyme Husqvarna
    AA Class

    Location:
    Sydney Australia
    Husqvarna Motorcycle:
    Terra 650, WR300 both 2013
    Other Motorcycles:
    Yamaha TTR 600 Belgarda
    Ill be in for one of these, does it then just take a TE rotor?
    Rickyme, Aug 12, 2017
    #3

  4. SmokeyExpress Husqvarna
    AA Class

    Location:
    Canberra Australia
    Husqvarna Motorcycle:
    2014 WR300, 1996 WR360,2013 WR125
    Yes it does! Works great! No more floating rotor to annoy you rattling away!
    SmokeyExpress, Aug 13, 2017
    #4

  5. Rickyme Husqvarna
    AA Class

    Location:
    Sydney Australia
    Husqvarna Motorcycle:
    Terra 650, WR300 both 2013
    Other Motorcycles:
    Yamaha TTR 600 Belgarda
    Awesum thanks Smokey, Nice to see a WR addict in Canberra I reckon ill get one here in Aus. Did the bolt kit for TE fit? also what model TE rotor are you running
    Cheers
    Rickyme, Aug 13, 2017
    #5

  6. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Huskynoobee, Aug 14, 2017
    #6

  7. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    The part # is 8A00H4977 and is for 250/310 and 449/511 Husqvarna 4 strokes. Please don't forget that you will need to order the special bolts that are made for this rotor. Your stock rotor bolts are NOT compatible.
    Huskynoobee, Aug 14, 2017
    #7

  8. SmokeyExpress Husqvarna
    AA Class

    Location:
    Canberra Australia
    Husqvarna Motorcycle:
    2014 WR300, 1996 WR360,2013 WR125
    That is correct! 2013 te250/310 rear rotor! BUT you do need the corresponding rotor bolts!
    SmokeyExpress, Aug 14, 2017
    #8