1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc WR 250 Owner's Manual

Discussion in '2 Stroke' started by mikebru, Jan 10, 2015.

  1. mikebru Husqvarna
    AA Class

    Location:
    Ocean County, NJ
    Husqvarna Motorcycle:
    2009 WR250; 2012 TE449; 2005 TE450
    Does anybody have an electronic copy or link to a 2009 WR 250 owner's manual?

    I have the parts and workshop manuals.

    Thanks
    Mike
  2. R-J van Hulst Husqvarna
    Pro Class

    Location:
    Cambodia
    Husqvarna Motorcycle:
    WR 125 + 40 = WB 165 and a SM165
    Other Motorcycles:
    Honda CB 400 Vtec 3
  3. wrtimmy Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2014 WR300
    I got a 2014 250/300 one if it's any use?
  4. sned2502st Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2011 WR250
    The owners manual is usless. Unless you need to read it in 6 different languages. Is your shop manual electronic? I have the 2011 owners manual I could send you. I know there are some differences but not much.
  5. mikebru Husqvarna
    AA Class

    Location:
    Ocean County, NJ
    Husqvarna Motorcycle:
    2009 WR250; 2012 TE449; 2005 TE450
    Thanks guys.

    I use my phone to read all the manuals, parts disgrams, etc... when working on the bike.

    The owner's manual is nice because it's less pages to scroll through than the workshop manual when looking for fluid specs, suspension settings and things like that.

    I had an owners manual for some year bookmarked on my phone but I somehow wiped out the hundred or so bookmarks I had, so now I'm trying to re-establish all of them for future use.

    But yes,
  6. mikebru Husqvarna
    AA Class

    Location:
    Ocean County, NJ
    Husqvarna Motorcycle:
    2009 WR250; 2012 TE449; 2005 TE450
    But yes, I'd take a copy of that 2011 owner's manual. Thanks a lot.
  7. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Anyone have a link to a workshop manual - info on primary coil resistance ?