250-500cc Wr 250 2007 Float Level

Hi,

Is there any step by step pictures instructions for adjusting the float Level... its for the tmx mikuni from my 2007 WR 250 .

I cant understand the indications found here ...all of them are without pictures... so would appreciate some tips with pics...

Thanks in advance...

some say The carb has to be upside down and vertical.. others that has to be 45 degree inclination...
but more confusing is how or where to get those 6mm adjustment float.. where and from should i measure ? and How ? I just got the bike and before messing with the jetting Ill need to set the <float level perfect...
The correct measure is 6mm or 8mm ? all over confusion for me here..on a subject that for many of you will be an easy one to set up... but for me seem kind complicated without pics from this tmx carb floats and measure guide points...

This is an important setting. I set mine upside down. I watch[with magnification] when the float tab just touches the float needle; the float should be parallel with the base of the carb body.