Windscreen/windshield for Husky SM610 w/ 1 1/8" bars

[jckid]

I posted this on ADV as well, but thought you guys might have some suggestions as well...

I've been searching for a windscreen for my Husky SM610 with no success. I like the MRA ST windshield, but it doesn't have brackets to fit 1 1/8" bars.

The brackets fit 7/8" bars or 1" bars. Do you think it would be possible to make them work?

I also found a Laminar Lip mounted on a TE610 that looked nice, but the SM has a different front headlight/shroud than the TE, and I don't think it would work. Seems like the hump at the top of the SM shroud might interfere.

Most universal windshields are for 7/8" or 1" handlebars, not 1 1/8". So does anyone know of a small windscreen that might be compatible with my bike?
__________________
2008 Husqvarna SM610
2008 Honda CRF230L

 

[Motosportz]

As far as i know there is no such thing as 1 inch bars.

 

[jckid]

As far as i know there is no such thing as 1 inch bars.

Some street bikes take 1" handlebars. I'm thinking if the brackets work on the 1" bars, it might not be too much of a stretch to modify them to work on 1 1/8".

 

[Doormandan]

I have been looking at this
http://www.laminarlip.com/supermoto.php What ever you use some modification will be necessary. Laminar is only about 60 miles from my office, I think someday soon I will take my bike to there office to see what fits best.

Dan L

 

[Muddy Waters]

I've been searching for a windscreen for my Husky SM610 with no success.......

Check this out --> :ride: <-- click
Rajobigguy’s bike has a face mask, ask him what he used

 

[Doormandan]

--------------------------------------------------------------------------------

Quote:
Originally Posted by Dan L
Rajobigguy
Where did you get the windshield
Dan L

The windscreen is a after market (zero gravity), for the Buell Ulysses. Its about 3.5" taller than the factory Buell, they are about $100.00. I think it looks pretty good on the bike and it really helps a bunch when you're cruising at 70+.
__________________
I'm just here to help

 

[rajobigguy]

When I get a chance I'll take some pics of how I mounted it. It's basically using some snaps with a couple of small support rods off of the handgaurds, real easy set up that is quick release and will break away if you hit it from the top or behind (no windshield style decapitations).

 

[jckid]

When I get a chance I'll take some pics of how I mounted it. It's basically using some snaps with a couple of small support rods off of the handgaurds, real easy set up that is quick release and will break away if you hit it from the top or behind (no windshield style decapitations).

That would be excellent. Your setup looks great--just what I need. I just installed Zeta handgaurds too, so I could probably use your mounting idea. My only concern would be that my SM headlight plate is a little different than your TE one. I'm getting ready for trip to Death Valley, and a windscreen would be nice. Not sure if I'll be able to get anything installed in time, but at least I can start planning for the next trip.