Where to find a clutch? '10 te310

Have one on backorder from Halls for over a Month now. Local dealer says backorder as well.

Prime riding season right now and I'm tired of borrowing my dad's WR. (actually I'd love to trade him permanently)

Anyone know where I can find a clutch? Would really like to get out on my own bike without having to worry about breaking a loaner.

Maybe try Rekluse, they sell regular clutch parts as well as auto clutch's. Just some out of the box suggestion. Good luck.

What parts do you need for the clutch?

frictions and steels.

If yours is an Italian big-block motor, like mine, the frictions from a Honda CRF 450X will fit, I have been running them for 1000s of miles.

Dual-sporting a 2010 TE 450, with cheap tricks

Hmm.. i wonder how i can figure out if they will work in mine or not? Talked to Halls friday. Backorder is not supposed to be filled until APRIL! Unacceptable. i cant be off my bike for 6 months of good riding weather.

different part numbers between the 450/510 and my 310.

Um, how hard did you look? http://www.ebay.com/itm/HINSON-CLUT...:2009|Model:TE310&hash=item58bc6f4777&vxp=mtr. This bike shares plates and fibers with a lot of different bikes (which is not uncommon for clutchs).

you are THE MAN!

what kind of beer you like? I'll send you a 6-pack.

Ordered it in. It does not fit.


the hinson page also shows no clutch available for the '09/'10 te310.



still looking.

Seriously thinking of selling the bike if simple parts like this are unavailable,

If I had to wait for a part like you have, I would have quit a long time ago. But I'm a full time amateur dirt bike rider, not just an owner. So riding is my life. In your case, selling is best also.

The bad part on selling is that you can't sell it for much. Just reading a few threads here and it is obvious the Husky bikes are not too good and of course, no parts for so so many. SP is not liked or trusted here also. You just purchased the wrong bike. Just another lifes' mistakes to chalk up. Ktm and Husky are the same really so don't let the former bike be another life mistake. But if you did get the former bike, they have their own web site for you to utilize ktmtalk or something ... They might can help you now if you ask.

--

In an effort to learn some thing here, .. something that is new and useful... How did ruin a clutch on your bike? I just don't know how to do that and want to make sure I can avoid it in the future.

i can't tell if you are being sarcastic or not?

What/who is SP?

I love the Husky. we have 6 of them in our group. I dont want a different bike at all but 6 months to wait for a clutch is just not acceptable.

Clutch has a hard 3000 miles on it. The last few hundred with an EFM auto. Its just worn out and slipping non-stop.

Just forget all that other jargon ...

You worn that clutch in 3000 miles? I'm a puusy rider for sure then ... But I've also got a refluse on a bike ... I'm not so sure that device is holding firming in some gnarly uphills, so if it goes before any of the other 3 bikes clutches, I'll think it is the device ... I've just had almost zero clutch issues on any of these 250cc bikes ...

Too bad on the parts ... Are the plates really bad? Maybe you can reuse them in the short term. I have spare parts but no clutches ... Maybe I should buy a set also. I really try to take care of my bikes now when riding, like picking good lines, no fall overs ... I'm mentioned this to a couple any guys here ... But you might wanna check your riding style and maybe get some higher mileage out of your bike before something goes away ...

SP is the KTM head huncho ... .. CEO ... All around MR. Racer Guy...

try sales@motozportshusvarna.com and ask them about it.. also take a look at this posting http://www.ebay.com/itm/Husqvarna-T...Parts_Accessories&hash=item51c57a2845&vxp=mtr

Another option is to fill the OEM parts request form in this site: http://www.husqvarnaoutlet.com/oem_parts and tell them Halls is backordered for 6 months.

2013 clutch wont fit,

will email motozport.

filled out the OEM request this morning!

thanks! I HAVE to find one or this thing is getting sold.

http://www.ebay.com/sch/i.html?_fro...e 310 &_nkw=clutch husqvarna Te 310 &_sacat=0

Saw a 2012 on eBay too. Any chance it would fit?

i just went through all the parts fiche from 2000-current.

looks like all the 250's/310 from 2004 to 2010 share the same part number (8000 A0611)

all the other years are different.

Try here

http://www.husqyparts.com/en/model/2010/te_310ie_1/oem

Sorry about that bud, they had better return for you then, and take down there compatibility chart. Strange they would list it like that.