What Size Flywheel Puller?

Discussion in 'Older Single cams' started by HardCoreHusky, Jan 21, 2014.

  1. HardCoreHusky Husqvarna
    AA Class

    Location:
    South Carolina
    Husqvarna Motorcycle:
    1991 350WXE, 2004 TC450
    Other Motorcycles:
    01 Royal Enfield Bullet, 91 KTM 250
    Man it sure is hard finding info on the correct flywheel puller on the internet! I have a 91 350 WXE and I need to pull the flywheel so I can check the timing. It is an SEM and using a dial caliper the thread bore comes out to 32mm, but can't find anything doing searches for any combinations including: SEM, Husqvarna, 32mm, flywheel puller etc. Any help appreciated.

    :confused:
    HardCoreHusky, Jan 21, 2014
    #1

  2. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Motosportz, Jan 21, 2014
    #2

  3. jcmed58 Husqvarna
    AA Class

    Location:
    North Atlanta Ga.
    I see your in S.C. call Gerald Jones at Upstate cycle in Greenville he might be able to help.
    jcmed58, Jan 22, 2014
    #3

  4. HardCoreHusky Husqvarna
    AA Class

    Location:
    South Carolina
    Husqvarna Motorcycle:
    1991 350WXE, 2004 TC450
    Other Motorcycles:
    01 Royal Enfield Bullet, 91 KTM 250
    HardCoreHusky, Jan 27, 2014
    #4