1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Water hose routing 87 430

Discussion in 'Vintage/Left Kickers' started by huskyJames, Jun 7, 2017.

  1. huskyJames Husqvarna
    A Class

    Location:
    Elverta Ca
    Husqvarna Motorcycle:
    85 XC500, 87 WR430
    Other Motorcycles:
    85 ATC 200x, 88 rm 125,
    I am having an issue. I know the lower outlet of the water pump goes back up to the rear of the engine. The other outlet goes down by the exhaust to the y, then up each side to the bottom of the tanks. The problem I am having is The fitted pieces, I cant get the routing from the upper outlet to the y under the exhaust. I think i may be missing something. Does anyone have a close up pick of the routing?
  2. chris squires Husqvarna
    AA Class

    Location:
    Midlands, UK
    Husqvarna Motorcycle:
    1987 CR240 CR500 1988 WR430
    image.jpeg image.jpeg image.jpeg

    Attached Files:

  3. chris squires Husqvarna
    AA Class

    Location:
    Midlands, UK
    Husqvarna Motorcycle:
    1987 CR240 CR500 1988 WR430
    Install the "Y" connector as in the image with the top of the "Y" facing towards the water pump.Do yourself a favour and install a stainless steel circlip to fasten the impeller to its shaft✊

    Attached Files: