1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Upper shock bolt mounting 81 430XC

Discussion in 'Vintage/Left Kickers' started by moto_surfer, Apr 13, 2017.

  1. moto_surfer Husqvarna
    AA Class

    Location:
    Chinook, WA
    Husqvarna Motorcycle:
    1981 430XC/ Silver Streak/TE300
    Could someone please post a couple of pictures of the proper way to secure my Ohlins. I don't think I have the correct bushings or hardware. I can't find a good picture on this site and the neither manual is very helpful on this. Also, if you know of where I could source the correct parts please let me know. It seems so simple but maybe legalizing weed in Washington has its downfalls? And because nobody like a thread without pictures... IMG_2566.jpg hustuvarna.jpg
  2. suprize Husqvarna
    Pro Class

    Location:
    Bendigo, Australia
    Husqvarna Motorcycle:
    WR 400, bike in a box Moto Villa 350
    Other Motorcycles:
    ktm 300
    ha ha...fantastic intro...I have no pictures or advice:(
  3. disonny Husqvarna
    AA Class

    Location:
    upstate ny
    Husqvarna Motorcycle:
    73 360 wr/rt, 75 wr250 78 cr250,
    Other Motorcycles:
    83 wr250, 84 wr400
    should be a bearing with 2 O rings and 2 collars. 1 each side of the shock.
    moto_surfer likes this.
  4. suprize Husqvarna
    Pro Class

    Location:
    Bendigo, Australia
    Husqvarna Motorcycle:
    WR 400, bike in a box Moto Villa 350
    Other Motorcycles:
    ktm 300
    then a bolt and a washer holding them on. phil at husqvarnaparts.com will have them
    moto_surfer likes this.