TE/TC TX 300 WHAT MODS?

What are the best Mods to make the bike Better or what has everybody done?

Skid plate,map s witch ash levers,re hand guards and skid plate pipe guard.
Need some ideas on set up? Carb front forks are at 132 . Evans coolant
What else has been done?

I'm sure you found this thread about skid plates. The SXS one looks like it has better case protection then the stock one.

http://www.cafehusky.com/threads/17-te300-skidplate-link-guard.86085/

I have an Obie link guard to add on to the stock skid plate for the time being. Still needs to be installed.

I love mine. I replaced the carb with a 38mm PWK from JD, got the SXS skid plate, put bibs in and a few other things like hand guards and radiator braces. The suspension is really good right out of the box. I've been running 139psi. Make sure you carry a spare battery for the fork pump in your tool box. Also did an FMF Turbine Core muffler.

I have changed so many parts! Lectron 38mm carb, 4-2 metering rod set at 2.002.5", V4R26 reed cage(a must), RK TEK Head (monday), trail tech voyager, core moto brake lines, gen2 tubeless, sxs skid and glide plate, rekluse exp core 3.0 clutch, rekluse slave cylinder, cycra ridged hand guards with hcm clamps, g2 quick turn throttle, husky rear spring,seat concepts team canada isde seat cover, modded air box, ktm xc-w intake flange (part#55430250000), fmf gnarly pipe & powercore silencer, Husqvarna hard parts Fan Kit, Hard parts Map Switch, Scott's Rubber Mounted Sub Mount Steering Stabilizer, Lime Nine Background Decals, EK Blue x-ring Chain and Renthal Twin Ring 51 Tooth Rear Sprocket. Unbelievable I know