Hey guys I just picked up my 2008 Husq SM610 with 2,115 miles. Looking to start some add ons and am not finding much of anything. I am interested in finding -steering damper -exhaust -skid plate -hand guards - complete decal/wrap kit and possibly some other suggestions I only want direct fit items that look like they are meant to be there, if that's actually possible. I am open to any suggestions you guys have on products!
Hyde Racing for the skid plate, it's lightweight polymer, but is great protection, I've tested them out... You might have to ditch the big evap emissions canister tumor on the right side. Just run the tank vent hose to the ground and cap the small hose nipple on the head. That's usually the first thing people do to these bikes... HDB is the best of the best in handguards, but all the big brands make some that will fit. Exhaust, there is Leo Vince and FMF. Graphics: http://graphicmx.com/hukit.shtml Steering damper: http://www.gprstabilizer.com/app_27_husqvarna_610
rear axle block sliders here: http://www.cafehusky.com/threads/official-six-nine-design-axle-block-slider-thread.41916/
Yes, same as the 610. I ordered these directly from Pro Moto Billet: Item: CR/WR/TE/TC 125-610Models 2004-2012 Evo 3 Foot-pegs (22-3-813) I had to grind the right side mount (the piece bolted on to the frame, not the peg itself). It had a lot of extra material that prevented the peg from retracting. I mounted mine in the low position.