1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

Thank you Zip Ty

Discussion in '4 Stroke' started by Sph123, Jul 19, 2016.

  1. Sph123 Husqvarna
    AA Class

    Location:
    West Jordan Utah
    Husqvarna Motorcycle:
    2017 Husqvarna TE250
    I got the re flashed ECU back and it has made a huge difference. I appreciate you and your team for the kick butt job and the quick turnaround. TE 310 now runs like the TXC310 did.
    MotoXImage likes this.
  2. MotoXImage Husqvarna
    AA Class

    Location:
    Lake Arrowhead, California
    Husqvarna Motorcycle:
    2017 FE 350
    Other Motorcycles:
    2000 XR 400
    What year bike?
    Trenchcoat85 likes this.
  3. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    what year is your 310? I was under the impression that with '13 & '14s (Kehin FI) the ecu had to be on the bike (or actually any same years 310) to reprogram (I imagine you could spoof it with a few sensors though; maybe a wiring harness)

    did ZTR have one in or didja bring your bike in?

    edit:

    shit... I had this queued up for almost a day- and you get in under me 13 minutes before I post? who would've thunk it?
    MotoXImage likes this.
  4. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    There are 310s around the shop. Yes the Kehin ECU needs to be in the bike. I'll pass on the kind words to Ty.
  5. Sph123 Husqvarna
    AA Class

    Location:
    West Jordan Utah
    Husqvarna Motorcycle:
    2017 Husqvarna TE250
    its a 2013. there are different maps you can put on it. Not sure if he used his own mapping, the European or the Australian mapping. the US Mapping is a mess due to emissions. And I just overnighted the ECU to him and he overnighted it right back. probably had it done and in the shop for less then 2 hours.