1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Te510 Indicators Not Working

Discussion in '4 Stroke' started by BlacktopAU, Mar 6, 2020.

  1. BlacktopAU Husqvarna
    C Class

    Husqvarna Motorcycle:
    TE510 08'
    On a 08' TE510 I'm having trouble getting the indicators to work.
    Long story short I ripped out an indicator and went to replace it, and found none of the indicators work!
    I've traced the wires back to the switch, and can't find a fuse or a relay, unless the switch is the relay?
    I've got no power to the switch, suggesting a fuse, but i can't find any related fuses. 20200307_142913.jpg
    BlacktopAU, Mar 6, 2020
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    There is a relay. It looks like a small flat black square or rectangular piece of plastic somewhere behind the headlight.. Mine went bad (after the bracket for it broke, and I hung it up on a zip tie) on my 07, and I replaced it with a standard heavy duty automotive flasher.
    Dirtdame, Mar 6, 2020
    #2

  3. honda4oo Husqvarna
    AA Class

    Location:
    canada
    8000A0645 Flash device
    honda4oo, Mar 7, 2020
    #3

  4. BlacktopAU Husqvarna
    C Class

    Husqvarna Motorcycle:
    TE510 08'
    I got it all sorted, it started working after I "jump started" it, I gave it a direct shot from the battery, and then out of no where it started working fine! Might have something to do with the LED no drawing enough to activate the flasher?
    BlacktopAU, Mar 8, 2020
    #4