1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

TE449 PCV with map switch

Discussion in '4 Stroke' started by DJay, Apr 27, 2016.

  1. DJay trying to get my posts posted :/

    Location:
    Downey, CA
    Husqvarna Motorcycle:
    2014 TE449
    I saw trail tech makes a 3 map switch, stock, 1 and 2. I would like to set it up so stock is without the PCV. 1 would be with map a mellow map and 2 with a more aggressive map.

    If I cut out power to the PCV would my bike still run on zipty race map3?

    Where can I find all the zipty maps?
    DJay, Apr 27, 2016
    #1

  2. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    I think the trailtech switch is designed to switch maps on the ECU itself. It basically does the same thing as plugging in the jumper under the seat to get race map II on the dash.

    I am trying to see if I can find some for you.
    Huskynoobee, Apr 27, 2016
    #2

  3. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Huskynoobee, Apr 27, 2016
    #3

  4. DJay trying to get my posts posted :/

    Location:
    Downey, CA
    Husqvarna Motorcycle:
    2014 TE449
    From what I can see in the instructions, it looks like any switch would work if I cut the ends connect into the PCV. Thanks for the Map. Is that Tinkens experimental map?



    Screen Shot 2016-04-27 at 10.19.21 AM.png
    DJay, Apr 27, 2016
    #4