1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

TE449 front and rear wheel bearing sizes

Discussion in '4 Stroke' started by mull, Aug 3, 2013.

  1. mull Husqvarna
    A Class

    Location:
    newcastle,england
    Husqvarna Motorcycle:
    te 449
    Other Motorcycles:
    Bmw g650 xchallenge
    Can anyone tell me the front and rear wheel bearing and seal sizes please,i like to have them handy before they become too worn...apologies if there is a link or thread on this issue.
  2. LandofMotards Moderator

    Location:
    Colorado
    Husqvarna Motorcycle:
    2014 TC250
    you can buy all that stuff at motosportzhusqvarna.com
  3. mull Husqvarna
    A Class

    Location:
    newcastle,england
    Husqvarna Motorcycle:
    te 449
    Other Motorcycles:
    Bmw g650 xchallenge
    Thanks for link landof,but i was looking to order a bit closer to home (england) if possible.
    I've been using a bearing company in u.k for the bmw but i need individual sizes to save me stripping old ones out first;)
  4. LandofMotards Moderator

    Location:
    Colorado
    Husqvarna Motorcycle:
    2014 TC250
    Oh sorry about that. That's what I get for half ass reading lol.
  5. teuchter Husqvarna
    AA Class

    Location:
    New Mexico USA
    Husqvarna Motorcycle:
    TXC449 2011
    Other Motorcycles:
    ZX6R track bike
    Bearings:

    25mm ID x 42mm OD x 9mm deep

    SKF model 6905-2RS

    2 for front wheel

    4 for rear
  6. mull Husqvarna
    A Class

    Location:
    newcastle,england
    Husqvarna Motorcycle:
    te 449
    Other Motorcycles:
    Bmw g650 xchallenge
    Thanks teuchter,these things are always useful to have jotted down ;)
  7. Shawntrain Husqvarna
    AA Class

    Husqvarna Motorcycle:
    TE511
    Hi guys, I just ordered some new bearings for the rear wheel on my 2013 TE511
    This will be the third set on the rear, I went with all balls on the last set and will do pivot works & NTN this time.
    I ordered the set from pivot works & the 2 drive side bearings will work (6005) but the brake side bearing will not - this is in the pivot works kit. I have ordered a 6300 (NTN rubber seal) from the local auto parts store for the brake side
    So: drive side = 6005 X 2
    Brake side = 6300 X 1
    PS there are new seals included in the pivot works kit:-)
  8. Shawntrain Husqvarna
    AA Class

    Husqvarna Motorcycle:
    TE511
    Update: the "pivot works" brake side bearing measures the same as the model# 6300 even though it reads #1004 on the side.
    The "pivot works" kit # is PWRWK-HQ01-001
    Who knew
  9. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125

    Not sure about the above, sorry mate.:(

    I haven't had to replace the front bearings on mine, so not sure on those.
    I do know they have different seal sizes, I only have the LH seal size - 28 x 50 x 5mm.

    There are actually originally 3 rear bearings (not 4). Two on the sprocket side & 1 x dual race on the brake side under the circlip.
    LH 2 x 6005LU
    RH 1 x 63005
    Seals are two of 32 x 47 x 7mm

    Any good bearing shop should be able to supply them cheaply without the need for a kit.
    R_Little likes this.
  10. Normann Husqvarna
    AA Class

    Location:
    Moscow/Valdai, Russia
    Husqvarna Motorcycle:
    TE449 MY2012
    David,
    may be 32x47x7mm?
  11. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
    Correct :thumbsup:
    Mis keyed it sorry. I'll go back & edit :)
    Normann likes this.
  12. Shawntrain Husqvarna
    AA Class

    Husqvarna Motorcycle:
    TE511
    Update: the NTN 6300 bearing is not the same as the All Balls 6300 ?? That rear single bearing on the brake side seems to be kind of an odd ball one. I get the measurments ID25mm x OD47mm x 16mm wide, I haven't been able to find an individual one from NTN, skf, timkin, etc, but I'll keep looking✌️
  13. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
    The actual number is 63005 - It denotes a double row ball bearing.
    All those companies should be able to supply an equivelent.

    http://www.fagbearing.cc/SKF-bearings/63005_2RS1_SKF_59754.html
    Shawntrain likes this.
  14. Shawntrain Husqvarna
    AA Class

    Husqvarna Motorcycle:
    TE511
    dangermouse449 that is super cool thanks
    Dangermouse449 likes this.
  15. Olive xm Husqvarna
    A Class

    Location:
    Kilmore
    Husqvarna Motorcycle:
    TE 449
    Anybody end up getting the front wheel bearing and seal sizes?
  16. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
    Yes I did :)

    Attached Files:

    aha2070 and domrvt like this.
  17. Olive xm Husqvarna
    A Class

    Location:
    Kilmore
    Husqvarna Motorcycle:
    TE 449
    Love your work DM, Thanks.
  18. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
    No problem.
    We have a good sized list of non-genuine and alternative parts for these bikes now.
  19. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
  20. aha2070 Husqvarna
    AA Class

    Husqvarna Motorcycle:
    smr 449
    Other Motorcycles:
    duke 200
    Bought a pair 16004 FAG, 20 X 42 X 8 .........ID 20 look smal, doubt will fit with front shaft