So I bought an hpi st5051l stator. The sem stator worked (ignition part) but the lighting part didn’t. The k10 had green blue red black wires going to TM11-10 ignition. The hpi stator has red green black going to ignition. Photo shows a blue wire but the blue is for optional 3 phase lighting circuit as per instructions. Instructions for stator lists 3 other stator models, not the st5051l. I’ve seen other sem transmatic ignitions with no blue wire on ktms. So does anyone know what I need to do? Hpi says this is a direct replacement for k10 stators and I see they have a replacement ignition cd5004 on there site. Lack of info and parts has made this one of the hardest bike to work on. I tore this thing down last yr and got it all back together just to find out the lighting would not work (thought it was the regulator). It was a one kick bike and hopefully it will be again. My hope is to re-plate the bike. Any help would be appropriated. Btw 350 is different than 410 610 as far as ignition.