1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

TE250 2011 REAR BRAKE HOSE

Discussion in '4 Stroke' started by jetmani, Apr 8, 2017.

  1. jetmani Husqvarna
    AA Class

    Hi guys,

    I need to change my rear brake line, Can anyone give me any tips as I have never done it before?
    jetmani, Apr 8, 2017
    #1

  2. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    hmmm, new hose: me neither. Get new crush washers (4 right?)

    if you have tubing or a syringe, it might be easier to fill the fluid from the bleeder. Else just fill the reservoir (put the m/c higher if you can- vertical distance makes getting the bubbles out easier) and watch for brake fluid coming up the tube you put on the cracked bleeder. Then the old pump-close-fill-open-pump routine.

    good luck.
    Trenchcoat85, Apr 10, 2017
    #2
    jetmani likes this.

  3. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    It's pretty straight forward just keep everything clean, fresh or well sealed fluid & yeah new copper washers be the go however I've changed them & just re-used old ones. May need to clean up & flip em possibly(one of mine leaked so flipped it & tightened touch more been fine since!).

    Syringe with hose & reverse fill MC best bet.
    shawbagga, Apr 10, 2017
    #3
    jetmani likes this.