1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Te250 -06 tight shims on the intakeside

Discussion in '4 Stroke' started by FredrikH, Jan 4, 2021.

  1. FredrikH Husqvarna

    Husqvarna Motorcycle:
    TE 250 -06
    Hi guys,

    Just checked the valveclearence on my TE250 -06 and it seems to be a bit tight on the intakeside, 0,15mm and 0,05mm.
    On the exhaustaide 0,20mm and 0,15mm.

    What can I do about the intakeside and what could have caused it?
    FredrikH, Jan 4, 2021
    #1

  2. silverstreakNZ Husqvarna
    Pro Class

    Location:
    Christchurch nz
    Husqvarna Motorcycle:
    82cr500,76gp360,90wr250,81 420AXC
    Other Motorcycles:
    74 tm400 , 02 gasgas ec 300
    As the valves wear the clearance closes up .
    You buy and swap in the appropriate sized shims to give correct clearance.
    Do not be alarmed this is nornal . Keep a record of this . If they wont stay in correct clearance for very long it means the valves are stretching and should be replaced because they will fail soon
    silverstreakNZ, Jan 5, 2021
    #2