Te 630 - Removing valve cover

Discussion in '610/630' started by Scott Eldredge, Sep 22, 2020.

  1. Scott Eldredge Husqvarna
    B Class

    Location:
    La Honda, CA 94020
    Husqvarna Motorcycle:
    2011 Te 630
    Other Motorcycles:
    BMW F850 GSA. Gas Gas Txt 300
    The bolts are out but I'm having trouble getting the cover off because of the clearances. Is it possible? Or do you need to start removing radiator hoses, etc.?
  2. kirbybikes Husqvarna
    AA Class

    It is tight but does come out. Push the rad hoses around to do it. Going in is a bit of a pain because of the gasket being disturbed.
  3. Scott Eldredge Husqvarna
    B Class

    Location:
    La Honda, CA 94020
    Husqvarna Motorcycle:
    2011 Te 630
    Other Motorcycles:
    BMW F850 GSA. Gas Gas Txt 300
    Wow. Nightmare job for a 3 minute check. I had to remove the radiator bolts and the water pump cover and pull it out of the way. Then it was just possible. The nut holding the impeller on was completely rusted, like you see on underwater wrecks. Curious.