1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

TE 250 in need of more Performance

Discussion in '4 Stroke' started by vmxwinn, Jan 18, 2018.

  1. vmxwinn Husqvarna
    AA Class

    Location:
    East of San Francisco, Danville CA
    Husqvarna Motorcycle:
    CR500,CR430,XC430,OR250,WR400,TE250
    Other Motorcycles:
    To many to list
    Looking to get more out of my little 07 TE250. So far it has a JD jetting kit and full TC250 exhaust. Otherwise stock low mileage/hour bike. I know a big bore kit would help and plan on that down the road but is there anything else that can be done? Like cams, different timing, etc....
    vmxwinn, Jan 18, 2018
    #1

  2. vsaltao Husqvarna
    A Class

    Husqvarna Motorcycle:
    TE250 2006
    Other Motorcycles:
    DRZ400E, DL650
    I think you need to go the big bore way, i am also going to do that to my te250 2006
    vsaltao, Jan 21, 2018
    #2

  3. ghte Husqvarna
    Pro Class

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    Yep big bore "Athena 310" kit. Will not give a lot more on top but a heap more in the low and mid range.
    ghte, Jan 21, 2018
    #3